Advantages of Using a Lock Nut
Advantages of Using a Lock Nut
Lock nuts, used in various industrial fields, are named as such due to their locking threads. In this system, when a nut is used with a bolt, if one has right-handed threads and the other has left-handed threads, the second nut installed is called the lock nut. Systems specifically developed for vibration work on the principle that if one nut tries to loosen in any direction, the other tries to tighten in the same direction. Using one of the nuts as a lock nut allows it to close tightly and prevents it from loosening over time.
Loosening of Nuts Prevented by Locking
The products preferred to prevent the loosening of nuts subjected to pre-tension allow for the prevention of yielding that may occur as a result of tightening the bolt's yield strength under static load. Static loads are situations where the bolt loosening problem does not occur. The loosening problem usually occurs under dynamic loads. If the angled bolt moves back and forth, the nut also moves. The variable force scattered by the vibration occurring in the axis of the bolt causes situations like average and variable stress. Lock nut options that prevent loosening by applying more torque are extremely advantageous with these features. The amount of force to be applied in the areas where the products will be used should be determined in advance.
Ideal Balance is Achieved in Nuts
The products, which are extremely advantageous in operations performed with an adjustable torque wrench, can be easily obtained from relevant online companies on internet pages. The products chosen to prevent bolts from loosening are among the best options that can be chosen to achieve an ideal balance. In tightening operations performed depending on personal effort, problems such as thread stripping, bolt breakage, or stripping of the bolt head can occur. Therefore, in the areas of use, the calculated and applied values must be shaped beforehand.
